Mapping Update Procedure 2025-1
- Download: Download the 2025-1 mapping above
- Media preparation: Use an SD card or USB flash drive with a minimum capacity of 32 GB, formatted in FAT32 with an allocation size of 64 KB. Then transfer the entire contents of the downloaded folder to the media.
- Installation in the vehicle:
- Start the vehicle’s engine.
- Insert the USB flash drive or SD card into the dedicated port, usually located in the armrest.
- The WipCom 3D or NaviDrive 3D navigation system will automatically detect the update. Select “Yes” and then press the “OK” button on the front of the system.
- Update process:
- The update starts and takes about 50 minutes to complete.
- It is imperative not to turn off the engine during this period, otherwise the update will be interrupted. It is advisable to drive during the update to avoid any risk of clogging the engine when stopped.
- Please note that the driver assistance systems will be disabled during the process.
- Error handling:
- If a type 0x26E error appears, just press “OK”. The system will automatically restart (be careful not to remove the stick or SD card) and continue the update.
- Finalisation :
- Once the update is complete, a confirmation message will appear. Press “OK” and remove the USB flash drive or SD card. The system will reboot.
- Checking for update: To verify that the update has been done correctly, press and hold the “Setup” button on the front panel, then select “Device Details” and finally “Card Versions”. The “EUROPE 2024-2” version should now be displayed.
List of countries:
Andorra, Austria, Belgium, France, Germany, Gibraltar, Great Britain, Ireland, Liechtenstein, Luxembourg, Monaco, Netherlands, Portugal, Spain, Switzerland.
Reminder: You may get the error code 0x26E at the end of the installation. Restart, then press “OK”. The installation is complete.